PCIM 2022

eGaN FETs and ICs developed by EPC provide the short pulse widths needed for higher-resolution LiDAR that enable autonomy as well as other vision-based systems.

Eggtronic’s wireless-power-transfer technologies can support existing technologies based on inductive standards like Qi, or implement application-specific capacitive solutions...

A spin-out of Cambridge University, Cambridge GaN Devices is a fabless semiconductor company that develops a range of energy-efficient enhancement-mode GaN-based power devices...

The Simcenter Micred Quality Tester from Siemens enables the assessment of a semiconductor package's thermal structure to identify manufacturing defects, including die-attach ...

The high-voltage superjunction STPOWER MDmesh M9 series claims the best maximum on-resistance x gate charge figure of merit on the market, as well as an approximately 30% reduction...

Power supplies developed with gallium-nitride technology can have double the power density of legacy PSUs and enable up to 20% energy savings.

Dr. Michael Schinke, VP of Marketing Communications at Infineon Technologies, discusses the current state of the industry as the company participates in the 2022 PCIM Exhibition...

An engineer from Nexperia explains the company's test setup for one of its high-current power solutions.

A representative from onsemi walks us through the silicon-carbide (SiC) manufacturing process, from powder to parts.

The SCALE EV family of gate-driver boards for Infineon EconoDUAL modules from Power Integrations targets high-power vehicle traction inverters.

VisIC Technologies' D3GaN solution offers better switching performance than cascade topologies, and is more robust than enhancement-mode devices.

Innoscience Technology is creating power semiconductor solutions based on its high-performance, low-cost gallium-nitride-on-silicon process.

Advances in gallium-nitride technology was evident everywhere at PCIM, including Navitas Semiconductor's GaNFast power ICs.

An engineer from Rohde & Schwarz uses the company's RTO6 oscilloscope to measure the control-loop response in a sample device under test.

Pre-Switch uses machine learning to constantly adjust the relative timing of elements within the switching system required, forcing a resonance to offset the current and voltage...

A Murata representative gives an explanation on one of the company's latest dc-dc converters at PCIM 2022.